Rotax 915 i A series Maintenance Manual page 501

Step Procedure
6 Loosen the M10 banjo bolt and sealing
ring on the turbo housing. Remove the
ball and compression spring.
7 Loosen cap nut on oil sump.
8 Remove the turbo return line from turbo
and oil pump housing. See also Chapter
78–20–00 section Turbocharger.
9 Remove oil return line.
Figure 22.35
Turbo pressure line
1
Banjo bolt M8x1x17
3
Cap nut
5
Compression spring
7
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Turbo oil suction line
Sealing ring
4
6
Ball
OIL HOSE— INSPECTION
Preparation
Clean all parts carefully.
See Maintenance Manual Line for the en-
gine type 915 i A Series Chapter 05-00-00
section Procedures.
General visual inspection.
See Maintenance Manual Line for the en-
gine type 915 i A Series .
79–00–00
Page 25
August 01 2018