Rotax 915 i A series Maintenance Manual page 266

Step Procedure
1 Loosen 4 Allen screws M5 from the
cover.
2 Disconnect the fuel inlet and outlet.
3 Disconnect the fuel pumps (main, aux):
• Lift the latches.
• Unplug the connectors.
Figure 11.15
1 Allen screws M5x12
3 Fuel outlet
73–10–00
Page 16
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Fuel inlet
Figure 11.16
Main pump (main)
1
Connector (Fuel
3
pump 1)
Figure 11.17
1 Connector
Step Procedure
4
Remove the fuel pump module from the
aircraft according to the aircraft manufac-
turer's manual.
5 Loosen the 4 hex. nut M6 and take the
fuel pump unit out of the housing.
Additional pump (aux)
2
Connector (Fuel pump
4
2)
Effectivity: 915 i A Series
Edition 0/Rev. 0