Rotax 915 i A series Maintenance Manual page 476

Step Procedure
10 Push the locking clip into place until the
beveled end retains the clip over the
shaft.
11 Mount low pressure hose and fix with
hose clamp.
Figure 21.31
1 Washer
Low pressure hose
3
FINISHING WORK
• Install coolant hoses, see
tion Expansion tank and coolant hose —
installation.
• Install air filter.
• Install hose from intercooler to turbocharger, see
documentation of aircraft manufacturer.
Fill with fresh oil. See Maintenance Manual
Line for the engine type 915 i A Series .
Purge the oil system. See Maintenance
Manual Line for the engine type 915 i A
Series .
• Carry out an engine test run and leakage check.
78–20–00
Page 18
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Locking clip
2
Hose clamp
4
Chapter 75-00-00 sec-
Effectivity: 915 i A Series
Edition 0/Rev. 0