Rotax 915 i A series Maintenance Manual page 503

Step Procedure
3 Install the turbo pressure oil line on the
turbo housing. Tightening torque 17 Nm
(150 in. lb). See also
Turbocharger.
NOTE
Do not forget to install the ball and
spring.
4 Install the turbo suction oil line on the tur-
bo and on the oil pump housing. See also
78–20–00 Turbocharger.
ATTENTION
Do not install ball and spring for check valve in
wrong order. In this case the oil supply will be
blocked completely.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
78–20–00
Figure 22.37
Turbo pressure oil line
1
Banjo bolt M8x1x17
3
Cap nut
5
Spring
7
Step Procedure
5 Install the cable clamp for supporting the
turbo oil suction line on the turbocharger
bracket.
Tightening torque 5 Nm (44 in. lb).
6 Install the cable clamps on the turbo pres-
sure and oil suction line.
Tightening torque 5 Nm (44 in. lb).
NOTE
Always use new lock nuts.
2
Turbo suction line
Sealing ring
4
6
Ball
79–00–00
Page 27
August 01 2018