Disassembly; Disassembling The Sprag Clutch Housing - Rotax 915 i A series Maintenance Manual

DISASSEMBLY

DISASSEMBLING THE SPRAG CLUTCH
HOUSING
The sprag clutch housing should be disassembled
on a clean surface. There must be enough space to
lay out the removed parts to ensure that all the parts
can be laid out and allocated according to their instal-
lation position.
Procedure
Step
1
Remove the circlip from the sprag clutch
housing.
2 Compress the Seeger ring slightly using
Seeger ring pliers and take the sprag
clutch out of the sprag clutch housing
while turning it.
Figure 7.8
Circlip
1
Sprag clutch housing
3
72–20–00
Page 8
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Seeger ring
2
Figure 7.9
Sprag clutch housing
1
Circlip
3
2 Sprag clutch
Effectivity: 915 i A Series
Edition 0/Rev. 0