3) Time limit for rubber parts
The following components and systems must be replaced every 5 years:
- venting hose of the carburetors
- all rubber hoses of the cooling system
- all rubber hoses of the fuel system
- all rubber hoses of the lubrication system which are part of the engine supply volume
and if they are not in the maintenance schedule of aircraft manufacturer.
- carburetor sockets
- diaphragm on both carburetors
- rubber hoses on compensating tube
- V-belt
■ CAUTION: This time limit must be followed independently and in addition to the
4) Time limit for the coolant
Coolant must be replaced as per manufacturer's instructions, at the latest during
overhaul or when the engine is replaced.
5) Annual inspection
A 100 hr. inspection is to be carried out periodically after every 100 hours of operation
or every 12 months, whichever comes first. See 05-10-00, sec. 2.
Effectivity: 914 Serie
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
visual inspections (05-20-00, sec. 2.2) of the respective components.
05-10-00
page 5
May 01/2007