Rotax 915 i A series Maintenance Manual page 430

CYLINDER HEAD TEMPERATURE SENSOR (CTS) — INSPECTION
Measurement
Temperature [°C/°F]
-10 °C/14 °F
0/32 °F
20 °C/38 °F
80 °C/176 °F
100 °C/212 °F
EXHAUST GAS TEMPERATURE SENSOR (EGT 1, EGT 2, EGT 3, EGT 4) - INSPECTION
Exhaust gas temperature sensor (EGT 1, EGT 2, EGT 3, EGT 4)
Measurement
Temperature [°C/°F]
-40 °C/-40 °F
0/32 °F
50 °C/122 °F
100 °C/212 °F
200 °C/392 °F
300 °C/572 °F
500 °C/932 °F
KNOCK SENSOR (KNOCK) — INSPECTION
Preparation
Carry out a general visual inspection: Check that the sensor is securely fitted.
• Corrosion or damage to the wiring, connector contacts or connections
Voltage and resistance test
• cannot be tested
76–70–00
Page 22
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Cylinder head temperature sensor (CTS)
Resistance [Ω]
9395 +/- 7 %
5895 +/- 7 %
2499 +/-6 %
323 +/-3 %
187 +/- 2 %
Resistance [Ω]
169.7
200.5
238.5
275.9
349
419.7
534.1
1
1
2
2
Figure 18.32
1
1
2
2
Figure 18.33
10080
10080
Effectivity: 915 i A Series
Edition 0/Rev. 0