Rotax 915 i A series Maintenance Manual page 472

Figure 21.22
1 Exhaust bracket
3 Lock washer
Spacer
5
TURBOCHARGER ASSY.—
INSTALLATION
Procedure
Step
1 Place distance spacer 10.5/17/15 into the
engine suspension frame.
2
Screw turbocharger assembly to the en-
gine housing, complete with muffler and
turbocharger bracket with washer, lock
washer and Allen screw M10x50. Tight-
ening torque 60 Nm (44 ft. lb).
78–20–00
Page 14
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Allen screw M10x50
4
Washer
Figure 21.23: TYPICAL
Turbocharger bracket
1
3 Lock washer
Spacer
5
Step Procedure
3 The muffler is attached to the exhaust
bracket with the tension clamp tightened
to a torque of 20 Nm (15 ft. lb).
ATTENTION
Position tension clamp so that the tension free
zone comes to rest on the edge of the exhaust
bracket.
2
Allen screw M10x50
4
Washer
Connection turbo-
charger bracket with
6
engine suspension
frame
Effectivity: 915 i A Series
Edition 0/Rev. 0