Rotax 915 i A series Maintenance Manual page 114

Figure 4.13
Connector regulator A
1
Figure 4.14
1 Connection socket
Step Procedure
4 Remove the two round connectors (la-
belled Lane A, Lane B) of the fuse box.
NOTE
Loosen the connector cap nut coun-
ter-clockwise.
5 Pull the connectors in the two grooves
out of the connector socket.
71–00–00
Page 20
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Connector regulator B
2
2 Connector regulator
Figure 4.15
NOTE
Round connectors have different grooves and
cannot be mixed.
Fuel pump
See Chapter 73–10–00 section Fuel pump assy. –
removal.
Control unit (ECU)
ATTENTION
ECU connectors are limited to 20 mating
cycles.
Coupler removal must be logged on label.
See Chapter 76–10–00 section Control unit
Step Procedure
1 Press in the lock so that the clamp can be
rotated.
2 Press the clamp down until it latches.
(ECU).
Effectivity: 915 i A Series
Edition 0/Rev. 0