Rotax 915 i A series Maintenance Manual page 466

Figure 21.10
Low pressure hose
1
Wastegate regulator
3
Procedure
Step
2 Loosen locking nut from the rod end.
3 Remove the locking clip, washer and rod
end from the wastegate lever.
4 Remove bushing from the wastegate
lever.
Figure 21.11
Locking nut
1
Locking clip
3
Bushing
5
78–20–00
Page 8
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Hose clamp
2
Rod end
4
Washer
6 Wastegate lever
Step Procedure
5 Remove two collar nuts with washers
from wastegate regulator protection plate
of the turbocharger housing.
6 Remove wastegate regulator assy. and
protection plate.
Figure 21.12
Wastegate regulator
1
assy.
Turbocharger housing
3
5 Collar nut
2 Protection plate
4
Washer
Effectivity: 915 i A Series
Edition 0/Rev. 0