Rotax 915 i A series Maintenance Manual page 220

Figure 8.47
1 Airbox
3 Washer 6.4
• Install the spark plugs and connect the spark plug
connectors. See Chapter 74-20-00 section
Distribution.
• Install the wiring harness. To do this, see
76- 70-00 section Sensors and
Figure 8.48
Temperature sensor
1
Spark plug connector
3
• Install the fuel line assy. To do this, see
73-10-00 section Fuel pump and
72–30–00
Page 34
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Hex. nut M6
Chapter
actuators.
Hex./torx collar screw
2
M6x20
4 Insulating flange
Chapter
distribution.
• Install the exhaust system. See
section Exhaust.
Fill with coolant.
See Maintenance Manual Line for the en-
gine type 915 i A Series.
Chapter 78-00-00
Effectivity: 915 i A Series
Edition 0/Rev. 0