Pop Off Valve - Installation - Rotax 915 i A series Maintenance Manual

POP OFF VALVE — INSTALLATION
Reduction sleeve - installation (if necessary)
• Install air intake hose and the hose to intercooler
and fix with clamps.
• Install low pressure hose and fix with hose clamp.
Figure 11.85
Hose clamp (low
1
pressure hose)
3 Reduction sleeve
5 Air intake hose
Step Procedure
1 Install valve housing with new O-ring on
reduction sleeve using 4 M5x16 Allen
screws.
Tightening torque 5 Nm (44 in. lb).
73–10–00
Page 46
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Low pressure hose
Clamps (intercooler /
4
air intake)
6
Intercooler hose
1 M5x16 Allen screw
O-ring
3
Figure 11.86
Step Procedure
2 Insert new O-ring 38x2.4 into the O-ring
groove of the valve cover.
Figure 11.87
1 Valve cover
O-ring
3
Step Procedure
3 Insert valve piston and valve spring. In-
stall the valve cover.
Valve housing
2
2 Hose nipple
Effectivity: 915 i A Series
Edition 0/Rev. 0