Rotax 915 i A series Maintenance Manual page 363

READ OUT LOG FILES
General
To have all information it is recommended to extract
Lane A and B and also Fault and Data logs. The ex-
traction process (read out) may take 10 minutes or
more depending on the number of logs.
NOTE
Fault logs: Fault, failure and warning entries in
the ECU.
Data logs: ECU data recorded in a rolling
memory.
Step Procedure
1 Change to "Logs" tab.
2 Select "Extract logs".
Figure 15.12
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Step Procedure
3 Disconnect and re-connect the power
supply if B.U.D.S. Aircraft requests to do
so.
Figure 15.13
NOTE
After the extraction process has finished
B.U.D.S. Aircraft requests to power cycle the
ECU (Disconnect + Re-connect power supply).
76–10–00
Page 13
August 01 2018