Technical Data; Operating Limits; Operating Fluids/Capacities; Weights - Rotax 915 i A series Maintenance Manual

TECHNICAL DATA

Detailed technical data relevant for operation is listed in the Operators Manual and must be

OPERATING LIMITS

See the current 915 i A Series Operators Manual, "Operating instructions".

OPERATING FLUIDS/CAPACITIES

See the current 915 i A Series Operators Manual, "Operating media".

WEIGHTS

See the current 915 i A Series Operators Manual, "Technical data".

ENGINE/COMPONENTS, GENERAL

Design
Bore
Stroke
Displacement
Cylinders
Pistons
Cylinder head
Compression
Intake valve
Exhaust valve
Valve clearance
Valve drive
Camshaft
Crankshaft
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
ATTENTION
observed.
4-cylinder turbocharged engine
84 mm
61.0 mm
1352 cm³
Light alloy cylinder with Nicasil plating
Light alloy piston with 3 piston rings
4 single cylinder heads
8.2:1
38 mm, valve seat plated
32 mm NIMONIC, valve seat stellite-plated
Automatic valve clearance compensation by means of hydraulic valve tappet
OHV, hydraulic valve tappet, push-rods and rocker arms
Steel, heat- and surface-treated
Supported in 5 plain bearings, case hardened
71–00–00
Page 9
August 01 2018