Rotax 915 i A series Maintenance Manual page 223

FINISHING WORK
• Install the coolant hoses to the inlet and outlet el-
bow. See Chapter 75-00-00 section Cooling
system.
• Install the intake manifold. See
section Fuel system.
• Form the connection to the airbox. To do this, see
Chapter 73-10-00 section Fuel pump and
distribution.
• Install the fuel rail assy. To do this, see
73-10-00 section Fuel pump and
• Install the spark plugs and connect the resistance
spark plug connectors. See
tion Distribution.
• Install the temperature sensor and connect the wir-
ing harness. To do this, see
tion Sensors and actuators.
• Install the fuel line inlet and outlet. To do this, see
Chapter 73-10-00 section Fuel pump and
distribution.
• Install the exhaust system. See
section Exhaust.
• Connect the wiring harness. See
00 section Wiring harness.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Chapter 73-00-00
Chapter
distribution.
Chapter 74-20-00 sec-
Chapter 76-70-00 sec-
Chapter 78-00-00
Chapter 76-00-
72–30–00
Page 37
August 01 2018