Table of Contents
Advertisement
2.1)
Time limit for rubber parts
General note
The following components and systems must be replaced every 5 years:
Time limit
-
-
-
-
-
-
-
-
-
2.2)
Time limit for the coolant
Coolant must be replaced as per manufacturers instructions, at the latest
General note
during overhaul or when the engine is replaced.
2.3)
Annual inspection
A 100 hr. inspection is to be carried out periodically after every 100 hours
General note
of operation or every 12 months, whichever comes first.
See chap. 05-10-00 section: 2).
Effectivity: 912 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
This time limit must be followed independently and in
NOTICE
WARNUNG
addition to the visual inspections (see chap. 05-20-00
section:
venting hose of the carburetors
all rubber hoses of the cooling system
all rubber hoses of the fuel system (incl.
teflon hoses)
all rubber hoses of the lubrication sys-
tem which are part of the engine supply
volume and if they are not in the mainte-
nance schedule of aircraft manufacturer
carburetor sockets
connecting hose of the air intake system
diaphragm on both carburetors
rubber hoses on compensating tube
V-belt
5.1))
of the respective components.
Fuel pump and insulating flange, if this is
fixed with fuel hoses.
05-10-00
page 8
October 01/2009
Advertisement
Chapters
Table of Contents
