Assembly Of The Damper Clutch Assy - Rotax 915 i A series Maintenance Manual

Step Procedure
3 Align the friction plates.
Figure 6.53
Friction plates
1
Procedure
Step
4 Install clutch hub. Check if support ring is
installed.
5 Install steel friction plate 4 mm with
groove facing to the bottom.
Figure 6.54
1 Clutch hub
Steel friction plate 4
3
mm
72–10–00
Page 36
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Auxiliary tool (self-
2
made pin)
2 Support ring
Step Procedure
6 Insert centering ring part no. 276950.
7 Press damper clutch assy. with insertion
jig part no. 276952.
8 Insert circlip and release damper clutch
assy.
NOTE
Check the alignment of clutch hub
once again. It must be free to move.
Figure 6.55
Insertion jig
1
ASSEMBLY OF THE DAMPER CLUTCH
ASSY.
NOTE
Use a hand operated hydraulic press or similar.
NOTE
Before assembly, lubricate all components with
engine oil.
Support ring
2
Effectivity: 915 i A Series
Edition 0/Rev. 0