5) Inspection And Adjustment Of "Squish Gap; Installation Of The Ignition System; 1) Spark Plug; 2) Ignition Coil - Rotax 125 Max Retrofit Instruction

5.1.5) Inspection and adjustment of "squish gap"

Perform inspection and adjustment of the "squish gap" according to the latest Repair Manual of the
respective engine type. See www.rotax-kart.com

5.2) INSTALLATION OF THE IGNITION SYSTEM

5.2.1) Spark plug

 Note: Following spark plugs are declassified by BRP-Powertrain:
Denso IW 24-31, as standard a Denso IW 27 is installed.
 Fit spark plug by hand and tighten to 27 Nm (239 in.lb).

5.2.2) Ignition coil

 Fasten the ignition coil together with the ground cable using 4 hex. nuts.
Tightening torque 10 Nm (90 in.lb)
 Install the spark plug connector.
Seite/page 52/59
Umbauanleitung/retrofit instruction 125 MAX Series
Fig. 39 (K00346)
Fig. 40 (K00358)
Ausgabe/Edition 09/2014