Rotax 915 i A series Maintenance Manual page 507

COMPONENT REPAIR
THREAD REPAIR
Magnetic drain plug
See Maintenance Manual Line for the en-
gine type 915 i A Series .
NOTE
It is possible to repair the thread of the magnetic
plug in the crankcase with a HeliCoil.
Drain plug
See Maintenance Manual Line for the en-
gine type 915 i A Series .
MACHINED AREAS
ATTENTION
The sealing surfaces on oil pump components
must not be repaired! If damage to these seal-
ing surfaces is found, the corresponding com-
ponent must be replaced with a new part.
• Machine areas on lubricant supply components
(oil pump cover) up to a maximum of 0.3 mm
(0.0118 in.).
• The indentations must not have sharp edges! Re-
move sharp edges carefully with a sharpening
stone. Damage limits must not be exceeded!
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
79–00–00
Page 31
August 01 2018