(2/4) And (1/3) Fuel Rail - Disassembly; Intake Manifold - Removal; Double Ignition Coil - Removal - Rotax 915 i A series Maintenance Manual

Left damper
5
7 Intake manifold
(2/4) AND (1/3) FUEL RAIL —
DISASSEMBLY
Step Procedure
1 Remove the injectors individually from
the fuel rail.
Figure 11.32
Left damper
1
Injectors
3
INTAKE MANIFOLD — REMOVAL
Preparation
Drain the fuel.
See Maintenance Manual Line for the en-
gine type 915 i A Series Chapter 12-20-00
section Planned maintenance.
• Unscrew the feed line to fuel rail 1/3 and the return
line to fuel rail 2/4 and fuel pressure regulator and
close them with the appropriate caps.
• Remove the (left and right) fuel rails.
• Remove the injectors from the fuel rails.
73–10–00
Page 22
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Right damper
6
Right damper
2
4
Fuel rail
• Remove the fuel pressure regulator assy.
DOUBLE IGNITION COIL – REMOVAL
See Chapter 74–20–00 Double ignition coil -
removal.
2/4 INTAKE MANIFOLD — REMOVAL
Step Procedure
1 Remove the 1-ear clamps.
Figure 11.33
1-ear clamps
1
Step Procedure
2 Loosen 4 hex./torx collar screws M6 in-
wards for attachment to the cylinder head
2/4. Use the special tool part no. 876180.
3 Loosen the two inner hex./torx collar
screws.
2
Intake manifolds
Effectivity: 915 i A Series
Edition 0/Rev. 0