Rotax 915 i A series Maintenance Manual page 45

Thread locker
for blind holes
Thread locker application for blind holes.
Figure 1.6: Application for blind holes
Step
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
1 On fastener threads
Procedure
1 Clean threads (bolt and nut) with solvent.
2 Apply LOCTITE 7063 on threads and allow to dry.
3
Choose proper strength LOCTITE thread locker.
4
Apply several drops along the threaded hole and at the bottom of the hole.
5
Apply several drops on bolt threads.
6
Tighten as required.
2 On threads and at the bottom of hole
00–00–00
Page 25
August 01 2018