Rotax 915 i A series Maintenance Manual page 496

OIL TANK
OIL TANK — REMOVAL
Follow the aircraft manufacturer's instruc-
tions for removal.
m WARNING
Danger of severe burns and scalds!
Always allow the engine to cool down to ambient
temperature before starting any work.
m WARNING
Danger of electric shock! Switch off the igni-
tion and pull out the ignition key! Disconnect
the negative terminal of the battery.
Preparation
• Turn the Master, Start and Lane Switch OFF
• Drain the oil
• Remove the oil tank according to the aircraft man-
ufacturer's specifications.
ENVIRONMENTAL NOTE
Dispose of used oil according to local environ-
mental regulations.
79–00–00
Page 20
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
ATTENTION
Use appropriate protective coverings to pre-
vent the ingress of debris particles into all dis-
connected lines and connections.
NOTE
The assemblies, hoses and lines are only to be
removed if necessary and only as far as is
necessary.
Step Procedure
1 Remove surrounding assemblies and de-
tach oil hoses.
Effectivity: 915 i A Series
Edition 0/Rev. 0