Rotax 915 i A series Maintenance Manual page 271

Figure 11.28
Injectors
1
Figure 11.29: Labelling diagram
Step Procedure
7
Use a screwdriver to lever out the spring
clip and then unplug the connector.
NOTE
Let the wire clip snap back in after the connector
has been disconnected so that it does not get
lost.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Figure 11.30
Injector connectors
1
Step Procedure
8 Loosen the two Allen screws M5x12 of
the left-hand fuel rail (2/4) attachment
and the two Allen screws M5x12 of the
right-hand fuel rail (1/3) with the lock
washers.
9 Remove the fuel rail on the left and right
of the intake manifold.
Figure 11.31
1 Allen screw M5x12
Fuel rail (2/4)
3
2
Screwdriver
Lock washer DIN 128–
2
A5–FST
4 Injectors
73–10–00
Page 21
August 01 2018