Rotax 915 i A series Maintenance Manual page 445

SYSTEM DESCRIPTION
Exhaust flow
The Exhaust gases are pushed out of the cylinders
through the exhaust pipes and are brought together
in the exhaust manifold. From there the exhaust
gases pass the turbine side of the turbocharger (de-
pending on the waste gate position). From there the
exhaust gases leave the engine through the muffler.
Exhaust Gas
Temperature Sensors (EGT)
The sensors for reading of the exhaust gas tempera-
ture are located the exhaust pipes near the cylinder
outlet.
SAFETY INSTRUCTION
m WARNING
Danger of severe burns and scalds! Allow the
engine and exhaust system to cool to ambient
temperature before starting work.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
78–00–00
Page 3
August 01 2018