Throttle Body Assy. - Removal - Rotax 915 i A series Maintenance Manual

Step Procedure
4 Remove the nipple and M6x16 screw.
Figure 11.40
Nipple
1
THROTTLE BODY ASSY. — REMOVAL
Preparation
• General visual inspection. See relevant Mainte-
nance Manual Line for the 915 i A Series type.
Step Procedure
1 Remove the throttle body assy.
2 Remove the clamp and the air intake
hose (delivered by manufacturer) from
the throttle body assy.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
M6x16 screw
Figure 11.41
Throttle body assy.
1
3 Air intake hose
Step Procedure
3
Remove the throttle cable from the throt-
tle body.
4
Loosen 3 hex./torx flange screws M6x12
with the fixation latch.
NOTE
They are installed with LOCTITE 243!
2
Connector
Clamp
4
73–10–00
Page 25
August 01 2018