Time Limit For Rubber Parts; Time Limit For Fuel Pump; Time Limit For The Coolant; Annual Inspection - Rotax 912 Series Maintenance Manual

2.1)

Time limit for rubber parts

General note
Time limit The following components and systems must be replaced every 5 years:
-
-
-
-
-
-
-
-
-
-
2.2)

Time limit for fuel pump

General note
The fuel pump must be replaced every 5 years.
2.3)

Time limit for the coolant

General note
Coolant must be replaced as per manufacturers instructions, at the latest
during overhaul or when the engine is replaced.
2.4)

Annual inspection

General note
A 100 hr. inspection is to be carried out periodically after every 100 hours
of operation or every 12 months, whichever comes first.
See chap. 05-10-00 section: 2).
Effectivity: 912 Series
Edition 3 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
This time limit must be followed independently and in
NOTICE WARNUNG
addition to the visual inspections (see chap. 05-20-00
section:
venting hose of the carburetors
all rubber hoses of the cooling system
all rubber hoses of the fuel system (incl.
teflon hoses)
venting hose of the fuel pump
all rubber hoses of the lubrication sys-
tem which are part of the engine supply
volume and if they are not in the mainte-
nance schedule of aircraft manufacturer
carburetor sockets
connecting hose of the air intake system
diaphragm on both carburetors
rubber hoses on compensating tube
V-belt
5.1)) of the respective components.
Fuel pump and insulating flange, if this is
fixed with fuel hoses.
05-10-00
page 8
September 01/2012