Rotax 915 i A series Maintenance Manual page 48

Thread locker for an
adjustment screw
Thread locker application for an adjustment screw.
Figure 1.9: Application for an adjustment screw
Step
NOTE
If it is difficult to readjust, heat screw with a soldering iron (232 °C) (450 °F).
00–00–00
Page 28
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
B00004
Apply here
1
Procedure
1 Adjust screw to proper setting.
2 Apply a few drops of proper strength LOCTITE thread locker on screw/body
contact surfaces.
3 Avoid touching metal with tip of flask.
Plunger
2
Effectivity: 915 i A Series
Edition 0/Rev. 0