Rotax 915 i A series Maintenance Manual page 141

Step Procedure
2 Press clutch assy. with insertion jig part
no. 276952 until the retaining ring is free
for removal.
3 To remove the retaining ring take a pin
with a diameter of max. 3 mm (0.12 in.)
and push it through the existing bore on
clutch drum. Then remove the retaining
ring using a small screwdriver.
Figure 6.21
Insertion jig 276952
1
3 Pin
Step Procedure
4 Now the damper clutch on propeller side
can be disassembled.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Retaining ring
Figure 6.22
Driving collar
1
Friction plate 1.54
3
mm
Steel friction plate 3
5
mm
7 Clutch hub
9 Clutch drum
PROPELLER SIDE
Step Procedure
1 Place the damper clutch (propeller side)
on the centering plate part no. 276954
and insert the centering ring part no.
276950.
2 Spacer ring
Steel friction plate 1
4
mm
6 Disk spring
Support ring
8
72–10–00
Page 15
August 01 2018