2.1)
Time limit for parts
General note
The following components and systems must be replaced every 5 years:
Time limit
-
-
-
-
-
-
2.2)
Time limit for the coolant
Coolant must be replaced as per manufacturers instructions, at the latest
General note
during overhaul or when the engine is replaced.
2.3)
Annual inspection
A 100 hr. inspection is to be carried out periodically after every 100 hours
General note
of operation or every 12 months, whichever comes first.
See chapt. 05-20-00 section: 1).
Effectivity: 912 i Series
Edition 1/Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
This time limit must be followed independently and
NOTICE
WARNUNG
in addition to the visual inspections (see chapt. 05-
20-00 section:
All rubber hoses of the cooling system
All rubber hoses of the fuel system (incl. teflon hoses)
All rubber hoses of the lubrication system which are part of the engine supply
volume and if they are not in the maintenance schedule of aircraft manufacturer
Connecting hose of the air intake system
V-belt
Fuel pressure regulator assy.
(only pressure regulator, not pressure regulator housing)
3)
of the respective components.
05-10-00
page 7
July 01/2012