Rotax 915 i A series Maintenance Manual page 392

SYSTEM DESCRIPTION
GENERAL NOTE
The wiring harness consists essentially of two main
parts, one for LANE A and one for LANE B. Both are
each connected with connectors to the ECU and to
the individual connectors to the sensors and
actuators.
The wiring harness connects all the engine parts
necessary for operation. In this way it provides the
electric supply for these parts and the exchange of
control and regulation signals.
SAFETY INSTRUCTION
m WARNING
Non-compliance can result in serious injuries
or death! The wiring harness and connectors
may only be disassembled by the manufac-
turer, by an authorised distributor or by an
aerospace company.
ATTENTION
Danger of damage to the power plant and air-
craft! It must be ensured that no electric volt-
age is connected and that repairs are carried
out properly.
NOTE
The general safety instructions must be followed
during all work on the wiring harness!
MAINTENANCE
As well as the maintenance and special
checks, see Maintenance Manual Line for
the engine type 915 i A Series 915 i A
Series.
76–50–00
Page 8
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Effectivity: 915 i A Series
Edition 0/Rev. 0