Rotax 915 i A series Maintenance Manual page 486

Step Procedure
7 Loosen 4 Allen screws with lock washers.
8
Remove the whole oil pump unit and O-
rings.
Figure 22.6
1 Allen screws M6x65
Oil pump housing
3
OIL PUMP — DISASSEMBLY
Step Procedure
1 Remove the plug screw, compression
spring and regulator piston.
79–00–00
Page 10
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Washer 6.4
Figure 22.7: TYPICAL
Plug screw
1
Regulator piston
3
Step Procedure
2 Remove the oil pump cover.
NOTE
If the cover sticks (from interfacial tension),
carefully release it with a soft-faced hammer.
Figure 22.8: TYPICAL
Oil pump cover
1
Compression spring
2
2
Soft-faced hammer
Effectivity: 915 i A Series
Edition 0/Rev. 0