Rotax 915 i A series Maintenance Manual page 396

NOTE
Unscrew the connector cap nut
counterclockwise.
Figure 17.11
NOTE
Round connectors have different index grooves
and cannot be mixed up.
Step Procedure
5
Pull the connectors out of the connector
sockets.
NOTE
Do not lose the grey rubber seals (in-
side of socket).
FUEL PUMP — DISCONNECTION
Wiring harness designation:
• FUEL PUMP_1 (MAIN pump)
• FUEL PUMP_2 (AUX pump)
Step Procedure
1 Loosen the 4 Allen screws M5x12 from
cover of the fuel pump assy.
76–50–00
Page 12
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Figure 17.12
1 Allen screws M5x12
3 Fuel outlet
Step Procedure
2 Unplug the connectors (FUEL PUMP 1,
FUEL PUMP 2) from the fuel pumps.
NOTE
First lift one side with a screwdriver, hold the tab
and then lift the lower tab with the screwdriver
and pull out the connector.
2
Fuel inlet
Effectivity: 915 i A Series
Edition 0/Rev. 0