Assembly; Assembly Of The Sprag Clutch Housing - Rotax 915 i A series Maintenance Manual

ASSEMBLY

ASSEMBLY OF THE SPRAG CLUTCH
HOUSING
Step Procedure
1 Clean the taper surface of the sprag
clutch housing with a cloth.
2 Apply LOCTITE ANTI SEIZE to the spear
body.
Figure 7.15
Taper surface
1
Sprag clutch
3
Step Procedure
3 Place the sprag clutch in the sprag clutch
housing; the Seeger ring must be visible.
4 Install the circlip so that its chamfer faces
the sprag clutch.
NOTE
To assemble it, compress it slightly
with Seeger ring pliers and ensure
that the Seeger ring remains in posi-
tion and latches completely with the
teeth in the slots of the sprag clutch
body.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Sprag clutch housing
2
Spear body
4
Figure 7.16
Sprag clutch
1
Circlip
3
2 Seeger ring
72–20–00
Page 11
August 01 2018