Rotax 915 i A series Maintenance Manual page 326

CONNECTIONS FOR DISPLAY
SYSTEMS
Follow the instructions in the Installation
Manual for the engine type 915 i A Series
regarding connections for instrumentation.
TEMPERATURE SENSOR
Coolant flows around the temperature sensor, which
measures the coolant temperature directly.
The temperature sensor is situated in cylinder head
4.
MAINTENANCE
As well as the maintenance and special
checks, see the Maintenance Manual Line
for the engine type 915 i A Series.
Before the cooling system is removed, the work de-
scribed below must be carried out to identify any fur-
ther malfunctions in the cooling system and rectify
them as part of the repair work.
ATTENTION
If these checks are omitted, it may be neces-
sary to dismantle the cooling system again to
rectify any malfunctions after it has been
repaired.
General visual inspection.
See Maintenance Manual Line for the en-
gine type 915 i A Series.
Engine cleaning.
See Maintenance Manual Line for the en-
gine type 915 i A Series.
Carry out an engine test run.
See Maintenance Manual Line for the en-
gine type 915 i A Series.
75–00–00
Page 8
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Effectivity: 915 i A Series
Edition 0/Rev. 0