Rotax 915 i A series Maintenance Manual page 451

REMOVAL
m WARNING
Danger of severe burns and scalds! Allow the
engine and exhaust system to cool to ambient
temperature before starting work.
Follow the aircraft manufacturer's instruc-
tions for removal.
Preparation
See Chapter 76-70-00 section
ture sensor (EGT1/EGT2/EGT3/EGT4) —
• Remove the temperature sensor (EGT).
Figure 20.3
Exhaust flange
1
Exhaust pipe
3
EXHAUST PIPE — REMOVAL
Step Procedure
1 Loosen 2 M8 lock nuts
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Exhaust gas tempera-
removal.
Temperature sensor
2
(EGT)
Sealing ring
4
Figure 20.4
1 Lock nut M8
Exhaust pipe
3
Only for cylinder 2 and cylinder 4
Exhaust pipe –removal
Step Procedure
2 Loosen four Hex. nut M5.
3 Remove the exhaust pipe clamp.
Figure 20.5
Exhaust pipe cyl. 2
1
Exhaust pipe clamp
3
5 Allen screw M5x10
2 Cylinder head
4 Exhaust flange
Exhaust pipe cyl. 4
2
4
Hex. nut M5
78–10–00
Page 5
August 01 2018