Command: Show Tech-Support Command - Dell PowerConnect 2808 User Manual

64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11

Command: show tech-support command

To display system and configuration information you can provide to the Technical Assistance Center
when reporting a problem, use the show tech-support command.
show tech-support [config] [memory]
Syntax Description
memory
• — (Optional) Displays memory and processor state data.
config
• — (Optional) Displays switch configuration within the CLI commands supported on the
device.
Defaults
By default, this command displays the output for technical-support-related show commands. Use
keywords to specify the type of information to be displayed. If you do not specify any parameters, the
system displays all configuration and memory data.
Command Modes
EXEC
Usage Guidelines
NOTE:
Avoid running multiple show tech-support commands on a switch or multiple switches on the network segment.
Doing so may cause starvation of some time sensitive protocols, like STP.
The show tech-support command output is continuous; it does not display one screen at a time. To
interrupt the output, press Esc.
If you specify the config keyword, the show tech-support command displays the output of the following
commands:
show clock
show system
show version
Dell PowerConnect 28xx Systems User Guide
165