Show Tech-Support - Dell S4810 Reference Manual

show tech-support

Display a collection of data from other show commands, necessary for Dell Networking technical support
to perform troubleshooting on S-Series or Z-Series switches.
S4810
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit
page
save
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Usage
Without the page or stack-unit option, the command output is continuous.
Information
To interrupt the command output, use Ctrl-z.
The save option works with other filtering commands. This allows you to save
specific information of a show command. The save entry must always be the last
option. For example: Dell#show tech-support |grep regular-expression
152
(OPTIONAL) Enter the keywords stack-unit to view CPU
memory usage for the stack member designated by unit-id.
The unit ID range for the S4810 is from 0 to 11.
(OPTIONAL) Enter the keyword page to view 24 lines of text
at a time. Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these
keywords to filter command output. For details about
filtering commands, refer to
Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A
maximum of 20 characters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced save to the file options.
Introduced on the S-Series.
CLI Basics.
Control and Monitoring