D-Link DXS-3600 Series Cli Reference Manual page 932

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch#
75-32 show ip ospf database nssa-external
This command is used to display information about the NSSA-external LSAs.
show ip ospf [vrf VRF-NAME] database nssa-external [LINK-STATE-ID | self-originate | adv-
router IP-ADDRESS]
Parameters
vrf VRF-NAME
LINK-STATE-ID
self-originate
adv-router
IP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the NSSA-external LSAs.
Example
This example shows how to display information about the NSSA-external LSAs.
Switch# #show ip ospf database nssa-external
LS age: 851
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: AS_NSSA_LSA
Link State ID: 0.0.0.0 (External Network Number For NSSA)
Advertising Router: 90.0.0.2
LS Seq Number: 0x80000001
Checksum: 0x14DF
Length: 36
Network Mask: /0
Metric Type: 1
TOS: 0
Metric: 1
NSSA: Forward Address: 0.0.0.0
(Optional) Specifies the IPv4 OSPF VRF process.
Specifies the link state ID (as an IP address).
Specifies the self-originated link states.
Specifies to display all the LSAs of the specified router.
Specifies the advertise router IP address
OSPF Router with ID (90.0.0.2)
NSSA-external Link States (Area 0.0.0.2)
927