D-Link DXS-3600 Series Cli Reference Manual page 792

Layer 2/3 managed 10gigabit
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to display MLD snooping multicast router information.
Switch# show ipv6 mld snooping mrouter
VLAN
-------- -------------------------------------------------------------------
1
eth1/0/4 (static), eth1/0/3 (static)
eth1/0/6 (forbidden)
eth1/0/7 (dynamic)
2
3
eth1/0/8 (static)
eth1/0/9 (dynamic)
Total Entries: 3
Switch#
66-22
show ipv6 mld snooping statistics
This command is used to display MLD snooping statistics information on the switch.
show ipv6 mld snooping statistics {interface [INTERFACE-ID[,|-]] | vlan [VLAN-ID [,|-]]}
Parameters
interface INTERFACE-ID [,|-]
vlan VLAN-ID [,|-]
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the MLD snooping related statistics information.
Example
This example shows how to display MLD snooping statistics information.
Switch# show ipv6 mld snooping statistics interface
Interface eth4/0/1
Rx: V1Report 1, v2Report 2, Query 1, v1Done 2
Tx: v1Report 1, v2Report 2, Query 1, v1Done 2
Interface eth4/0/3
Rx: V1Report 0, v2Report 0, Query 0, v1Done 0
Tx: v1Report 0, v2Report 0, Query 0, v1Done 0
Ports
no mrouter port
Specifies the interface of which to display the port statistics counter.
Specifies the VLAN of which to display the VLAN statistics.
787

Advertisement

Table of Contents
loading

Table of Contents