Show Snmp User - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
IP access control list:
GroupName: initial
ReadView
NotifyView
IP access control list:
GroupName: private
ReadView
NotifyView
IP access control list:
GroupName: private
ReadView
NotifyView
IP access control list:
Total Entries: 5
Switch#
This example shows how to display the SNMP engine ID.
Switch# show snmp engineID
Local SNMP engineID: 00000009020000000C025808
Switch#
101-2

show snmp user

This command is used to display information about the configured SNMP user.
show snmp user [USER-NAME]
Parameters
USER-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
: restricted
: restricted
: CommunityView
: CommunityView
: CommunityView
: CommunityView
(Optional) Specifies the name of a specific user to display SNMP
information.
1216
SecurityModel: v3/noauth
WriteView :
SecurityModel: v1
WriteView : CommunityView
SecurityModel: v2c
WriteView : CommunityView