D-Link DXS-3600 Series Cli Reference Manual page 631

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Example
This example shows how to turn on the IS-IS debug function.
Switch# debug isis
Switch#
48-48 debug isis interface
This command is used to turn on the IS-IS interface state debug switch. Use the no command to turn off
the IS-IS interface state debug switch.
debug isis interface
no debug isis interface
Parameters
None.
Default
By default, this function is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IS-IS interface state debug switch. When IS-IS interface state
changes or some events happen to change the interface state, debug information will print if the IS-IS
debug function is turned on. Use the debug isis command to turn on the IS-IS debug function.
Example
This example shows how to turn on the IS-IS interface state debug switch.
Switch# debug isis interface
Switch#
48-49 debug isis neighbors
This command is used to turn on the IS-IS neighbor state debug switch. Use the no command to turn off
the IS-IS neighbor state debug switch.
debug isis neighbors
no debug isis neighbors
Parameters
None.
Default
626