D-Link DXS-3600 Series Cli Reference Manual page 861

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
mpls ldp configuration
Parameters
None.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the command to enter the LDP configuration mode to configure LDP related settings.
Example
This example shows how to enter the LDP configuration mode.
Switch# configure terminal
Switch(config)# mpls ldp configuration
Switch(config-ldp)#
71-22 mpls qos policy
This command is used to enter the MPLS QoS configuration mode. If the policy doesn't exist, a new
policy will be created. Use no command to remove the policy.
mpls qos policy NAME
no mpls qos policy {all | NAME}
Parameters
NAME
all
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enter the MPLS QoS configuration mode. If the policy doesn't exist, a new policy
will be created. The MPLS QoS policy can be applied to MPLS FECs. Use the class-map exp-cos
Specifies the MPLS QoS policy name. The maximum name length is
32 characters.
Specifies to remove all MPLS QoS policies.
856