D-Link DXS-3600 Series Cli Reference Manual page 1388

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch#
119-11 show vrrp brief
This command is used to display the VRRP brief information.
show vrrp brief
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display VRRP brief status.
Example
This example shows how to display the brief VRRP information.
Switch#show vrrp brief
Interface VRID Pri
--------- ---- ----
vlan1
vlan1
vlan2
vlan3
Total Entries: 4
Switch#
Display Parameters
Interface
VRID
Pri
Owner
Pre
State
Master IP
Owner Pre State
------ --- ------ -------------- -------------
7 255 Y Y
8 200 Y
5 100 Y
1 80 Y
The Interface ID.
The virtual router identifier.
The VRRP priority value.
"Y" Indicates that the virtual router is the IP address owner.
Indicates if preempt mode is enabled or not. "Y" indicates preempt
mode is enabled.
The state of the virtual router.
The IP address of the master virtual router.
Master IP
Master 20.0.1.1
Master 20.0.1.1
Init 0.0.0.0
Backup 50.0.1.2
1383
VRouter IP
20.0.1.1
20.1.1.2
30.1.1.254
50.1.1.254