D-Link DXS-3600 Series Cli Reference Manual page 742

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
TC0 : 4
TC1 : 7
TC2 : 11
TC3 : 14
TC4 : 18
TC5 : 21
TC6 : 25
TC7 : 0
ETS Recommendation Traffic Selection Algorithm
TC0 : tsaEnhancedTransmission
TC1 : tsaEnhancedTransmission
TC2 : tsaEnhancedTransmission
TC3 : tsaEnhancedTransmission
TC4 : tsaEnhancedTransmission
TC5 : tsaEnhancedTransmission
TC6 : tsaEnhancedTransmission
TC7 : tsaStrictPriority
PFC Basic Configuration
Willing : Disabled
MBC : Disabled
PFC capability : 8
PFC Enable
priority0 : Disabled
priority1 : Disabled
priority2 : Disabled
priority3 : Disabled
priority4 : Disabled
priority5 : Disabled
priority6 : Disabled
priority7 : Disabled
Switch#
This example shows how to display the local information of port 1 in normal mode.
Switch# show lldp local interface ethernet 1/0/1
Port ID: eth1/0/1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
: Local
: eth1/0/1
: D-Link Corporation DXS-3600-32S
2.40.042 Port 1 on Unit 1
: 1
: 2
: 0
: 1
: 0
: (See Detail)
: (See Detail)
: 1536
737