D-Link DXS-3600 Series Cli Reference Manual page 1395

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to create a VRF instance VPN-A and add import and export targets.
Switch# configure terminal
Switch(config)# ip vrf VPN-A
Switch(config-vrf)# route-target import 100:1
Switch(config-vrf)# route-target export 100:1
Switch(config-vrf)#
120-8 show ip vrf
This command is used to display VRF settings.
show ip vrf [details | interfaces] [VRF-NAME]
Parameters
details
interfaces
VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to check the settings of VRF instances.
Example
This example shows how to check the current VRF's settings.
Switch# show ip vrf
VRF Name
------------------ ------ --------------------- ----------------------
VPN-A
VPN-B
Switch#
This example shows how to check detailed information about VRF VPN-A.
Switch# show ip vrf details VPN-A
VRF VPN-A; Default RD: 100:1
Interfaces:
(Optional) Specifies to display detailed information about one or more
VRFs.
(Optional) Specifies to display interfaces associated with one or more
VRFs.
(Optional) Specifies to display information associated with one VRF.
RD
100:1
Not set
1390
Interfaces
ip100