D-Link DXS-3600 Series Cli Reference Manual page 1197

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to display the status of SSH server connections.
show ssh
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the SSH connections' status on the switch.
Example
This example shows how to display SSH connections' information.
Switch# show ssh
SID Ver. Cipher
--- --- --------------------------- ---------------- -------------------------
0 V2 3des-cbc/sha1-96
1 V2 3des-cbc/hmac-sha1
Total Entries: 2
Switch#
Display Parameters
SID
Ver
Cipher
Userid
Client IP Address
97-9 ssh user authentication-method
This command is used to configure the SSH authentication method for a user account. Use the no form
of this command to restore the default authentication method.
ssh user NAME authentication-method {password | publickey URL | hostbased URL host-name
HOSTNAME [IP-ADDRESS | IPV6-ADDRESS]}
Userid
zhang3
lee4567890123456 2000::243
A unique number that identifies the SSH session.
Indicates the SSH version of this session.
The cryptographic / Hashed Message Authentication Code (HMAC)
algorithm that the SSH client is using.
The login username of the session.
The client IP address for this established SSH session.
1192
Client IP Address
192.168.0.100