D-Link DXS-3600 Series Cli Reference Manual page 630

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
VRF-NAME
Default
None.
Command Mode
Router Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
VRF instances must already exist before associate it with an IS-IS instance. The IS-IS instance settings
should be reset when the associated VRF instance changed and the interfaces belong to the IS-IS
instance should be removed.
Example
This example shows how to associate with a VRF instance.
Switch# configure terminal
Switch(config)# ip vrf vrf1
switch(config-vrf)# exit
Switch(config)# router isis
Switch(config-router)# vrf vrf1
Switch(config-router)#
48-47 debug isis
This command is used turn on the IS-IS debug function. Use the no command to turn off the IS-IS debug
function.
debug isis
no debug isis
Parameters
None.
Default
By default, this function is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IS-IS debug function while the global debug function has been
turned on before.
Specifies the name of the VRF instance.
625