D-Link DXS-3600 Series Cli Reference Manual page 985

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
In the area 0.0.0.0 via interface vlan8
Neighbor priority is 1, State is FULL, 5 state changes
DR is 12.0.0.1 BDR is 36.0.0.0
Options is 0x000013 (-|R|-|-|E|V6)
Neighbor 36.20.0.0, Link Local address FE80::2C0:8FFF:FE04:1128
In the area 0.0.0.0 via interface vlan10
Neighbor priority is 1, State is FULL, 6 state changes
DR is 36.20.0.0 BDR is 36.0.0.0
Options is 0x000013 (-|R|-|-|E|V6)
Neighbor 12.0.0.2, Link Local address FE80::202:FF:FE00:0
In the area 0.0.0.5 via interface vlan11
Neighbor priority is 1, State is FULL, 5 state changes
DR is 12.0.0.2 BDR is 36.0.0.0
Options is 0x000013 (-|R|-|-|E|V6)
Total Entries: 3
Switch#
76-26 show ipv6 ospf virtual-links
This command is used to display parameters and the current state of OSPF virtual links.
show ipv6 ospf [PROCESS-ID] virtual-links
Parameters
PROCESS-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
The information displayed by the show ipv6 ospf virtual-links command is useful in debugging OSPF
routing operations.
Example
This example shows how to display parameters and the current state of OSPF virtual links.
Switch# show ipv6 ospf virtual-links
(Optional) Specifies the internally used identification parameter for an
IPv6 OSPF routing process. It is locally assigned and can be any
positive integer. A unique value is assigned for each IPv6 OSPF
routing process.
980