D-Link DXS-3600 Series Cli Reference Manual page 1429

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters description:
interface-id: the interface on which the host is authenticated.
Event description: the authorized user number on an interface is below the
maximum user limit in a time interval.
Log Message: <interface-id> recovers from MAC-based Access Control stop
learning state.
Parameters description:
interface-id: the interface on which the host is authenticated.
Module
Log Description
Event Description: Module inserts and can works.
Log Message: Module <module-type> is inserted.
Parameters Description:
module-type: the expansion module name.
Event Description: Module inserts and can't works.
Log Message: Module < module-type > inserts but can't work except reboot device.
Parameters Description:
module-type: the expansion module name.
Event Description: Module hot removes.
Log Message: Module < module-type > is removed.
Parameters Description:
module-type: the expansion module name.
MPLS
Log Description
Event description: LSP is up
Log Message: LSP <lsp_id> is up
Parameters description:
lsp_id: The established LSP ID
Event description: LSP is down
Log Message: LSP <lsp_id> is down
Parameters description:
lsp_id: The deleted LSP ID
MSTP Debug Enhancement
Log Description
Event description: Topology changed.
Log Message: Topology changed [( [Instance:<InstanceID> ] , <interface-id> ,MAC:
<macaddr>)]
Parameters description:
InstanceID: Instance ID.
1424
Warning
Severity
Informational
Warning
Informational
Severity
Informational
Informational
Severity
Notice