D-Link DXS-3600 Series Cli Reference Manual page 445

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(config-if)#
32-4 show duld
This command is used to display the information of Ethernet OAM unidirectional link detection.
show duld [interface INTERFACE-ID [,|-]]
Parameters
interface INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.
Usage Guideline
This command used to display the information of DULD.
Example
This example shows how to display Ethernet OAM unidirectional link detection.
Switch# show duld interface ethernet 1/0/1
Ethernet 1/0/1
Admin State
Oper Status
Action
Link Status
Discovery Time(Sec)
Switch#
Specifies the interface ID to display. The allowed interfaces only
include physical ports.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
: Disabled
: Disabled
: Normal
: Unknown
: 5
440